Vehicle and fleet wrapping with certified films — Santoro
SOLUTION · VEHICLES AND FLEETS

I am branding vehicles and fleets.

You do not need to know whether you want cast film, lettering, a full wrap or a partial one. Tell us what vehicle you have and what it has to say: the film, the design and the fitting are our choice, all in-house.

A company vehicle works eight hours a day on the road anyway: the difference is whether it says anything in those hours. And you are not paying for it every month, the way you pay for a billboard.

HOW IT USUALLY GOES

A designer on one side, a fitter on the other, and the van standing still in between.

The route customers usually take on their own is in pieces:

A designer drawing the logo on a downloaded template A print shop printing without knowing where the film will end up A fitter who receives the artwork already cut, right or wrong Films bought at random, with no data sheet and no warranty The vehicle standing still while the three of them agree And if something is off, each one points at the other

The typical result: different colours between door and side panel, bubbles after the first sunny day, nobody answering for how long it lasts. What counts is the material and the hand that applies it — and that is exactly what gets lost when the job is split up.

HOW IT GOES WITH US

Design, printing and fitting in the same company.

The design starts from a photograph of your actual vehicle, not a template. Printing is in-house, with colour control. Fitting is done by our own installers, led by Ernesto Santoro, Italian wrapping champion at The Battle World Tour. Only 3M, Avery Dennison and Hexis films, with data sheets and warranties.

01One single quote, item by item, materials included
02The designer talks to the fitter, every day, in the same building
03Artwork kept on file: repairs and reorders are quicker the second time

We start by listening, not by opening a catalogue: what interests us is what you need to achieve, not what you think you have to buy. Sometimes the right answer is a few hundred euros of lettering, not a full wrap.

WHAT IS INVOLVED

From a colour change to paint protection. All in-house.

You can take one job or combine them: protection and a colour change live happily on the same vehicle — PPF is compatible with wrapping, and we decide the order at the design stage.

Full and partial wrapping

A colour change without repainting, on cars, luxury cars, motorbikes, boats and yachts. Reversible: the film protects the original paint.

Fleet branding

Vans and commercial cars, lorries, buses, right up to helicopters and aircraft. One design, applied identically across the series.

Certified films

3M, Avery Dennison and Hexis: stated durability, data sheets available, colours that hold.

PPF and BodyFence films

Clear protection that absorbs micro-scratches, full body or partial kits. Self-healing with heat, applied with parts removed.

Lettering and decals

The essential version: name, contact details and logo cut or printed, when a full wrap is not needed.

Window tinting

UV protection, privacy and safety: if the glass breaks, the film holds the fragments together.

A prototype on one vehicle

A sample vehicle approved in the flesh before the series is produced: mistakes are corrected on one, not on twenty.

Maintenance and repairs

Partial replacement on a single vehicle after damage, with the artwork pulled back out of the archive.

Every item is a job we do in our own departments, not a service resold. The three with links have a page of their own: if you already know what you are after, start there.

WHAT WE WORK ON

If it has bodywork, it can be done.

Cars and vansFull or partial colour change, commercial branding
Luxury carsSpecial finishes and satin wraps on prestige vehicles
MotorbikesPanels on any motorbike, reversible and protective
Boats and yachtsExteriors and interior refitting
Lorries and busesLarge surfaces, materials for heavy use
Special vehiclesHelicopters and aircraft, with a prototype before the series

The technique is the same from a scooter to an aircraft: the film changes, the timings change, the method does not.

In every case the rule is the same: the film comes off, the paint stays. That is why it works on leased vehicles too, which go back exactly as they were.

TIMINGS AND METHODS

The vehicle comes in, it leaves ready.

We make nothing before you have approved the design on your own vehicle. How long it takes depends on the vehicle — lettering is a matter of hours, a full wrap is not — and we set it in the quote, not verbally.

01Site visit and photographs of the vehicle. We photograph the actual vehicle, with its dimensions, handles and body lines: that is what the design is drawn on. If the vehicle cannot come to us, your own photographs are enough to start.
02Design and simulation. The design mounted on photographs of your vehicle, with proposed materials and a quote item by item. You approve what you will see on the road, not an abstract sketch.
03Printing and lamination. In our own departments, with colour control: the same shade today and at the next reorder.
04Fitting on our premises. Our own installers, in our workshops in Salerno: the vehicle comes in once. With fleets we work to scheduled downtime on your calendar, vehicle by vehicle.
05Handover and archive. The vehicle goes back on the road; the artwork stays on file for repairs and new vehicles.

Scheduled downtime

With fleets we work to a calendar, so operations are never blocked.

Repairs

After damage the panel is replaced, not the whole vehicle.

Reorders

A new vehicle joining the fleet leaves identical to the others.

ONE VEHICLE

Do you have a single vehicle?

Van, car, motorbike, boat: same route, same care, same installers. You can start with the minimum — lettering with your name and contact details — or go all the way to a full wrap. If the vehicle is new, PPF protects it from day one.

Request a quote
A FLEET

Do you run a fleet?

A fleet is an advertising circuit you already own: ten coordinated vans are worth more than ten billboards, and they are already paid for. A prototype on one vehicle, repeatable kits, the same colour across different materials, downtime scheduled without blocking operations.

Go to fleet branding
FREQUENTLY ASKED QUESTIONS
How long does a wrap last?

On average up to 5 years, and longer with the right care. What counts is the quality of the film, the climate, the maintenance and the hand that applies it: we have written about it in the article how long car wrapping really lasts.

Can it be removed?

Yes, it is completely reversible. We do it routinely on leased vehicles, which go back to their original colour. That is why wrapping makes more sense than repainting: you can always go back.

Does it ruin the paint?

No, the opposite: applied and removed properly, the film protects the paint from sunlight, weather and wear. Self-healing PPF recovers micro-scratches with heat.

How much does it cost?

It depends on the vehicle, the coverage and the film: lettering and a full wrap are two different jobs. The quote is item by item, based on a photograph of your vehicle: you know what you are paying before the vehicle comes off the road.

What warranties are there on the films?

We work only with certified 3M, Avery Dennison and Hexis films: manufacturer data sheets and warranties are available on request, before you sign.

How do you look after a wrapped vehicle?

Hand washing with a soft cloth, no automatic car washes and no harsh detergents, and repair scratches and tears straight away. With that care the film lasts longer than average.

LET US TALK

Tell us about the vehicle.

What vehicle it is, what it has to say, when you need it: those three things are enough for a quote, item by item. Even roughly. If you prefer, come by the store in Via dei Principati.

Via San Leonardo, 55 — Salerno · +39 089 3069835 Via dei Principati, 18 — Salerno · +39 089 2862289

If you already have photographs of the vehicle, send them with your enquiry: we start from those for the first simulation, without waiting for a site visit.